Woven Paper Shoes

Paper fabrics are easily flexible.So it is necessary to compound a backing. Many customers choose non-woven fabrics, canvas, cotton gauze, etc., To make paper raffia shoes. Have to follow several steps:

1. Based on the measurements on the upper of the sandal, cut a piece of paper raffia fabric slightly larger than the measurement.
2. Then apply a generous amount of glue to the top and bottom of the strap and attach the cut fabric to the strap.
3. If there is an excess raffia fabric that can be tucked under the straps, push the surface down smoothly and firmly by hand.
4. When the sandals are dry, the excess fabric can be shed.

More and more customers choose straw fabrics to make shoes, but how to choose such fabrics are also knowledge. Shoes are often worn on the feet, and they are most likely to get dusty and encounter water. Therefore, when we choose fabrics, we cannot choose very thin ones, but choose some relatively solid and easy-to-clean fabrics. Among the straw woven fabrics, some styles are good-looking, but the gaps are relatively large, and such fabrics are not recommended. There are some too thick fabrics for floor mats, which are not easy to use because they are not easy to bend.

If it is dusty or partially dirty, you can just stick it with the tape directly. You have to take it slowly, and it may become fluffy. You can also use a soft brush dipped in water, or use a toothpaste brush. After cleaning, put it in a cool place to dry.
Long-term sunlight exposure should be avoided. Strong sunlight exposure will cause cellulose pigments to oxidize, fade and become brittle. If it is not used for a long time, it should be stored in a sealed bag, or placed in a dry and light place, and cannot be exposed to the sun for a long time. In this way, the color of the straw will not fade for a long time, and the toughness will not change.